Lenovo Tab P10
21
This chapter presents the following product-specific service references and
product-specific parts information:
• “FRU replacement notices” on page 21
• “Removing and replacing an FRU” on page 23
• “Locations” on page 42
• “Parts list” on page 43
This section presents notices related to removing and replacing parts. Read this
section carefully before replacing any FRU.
Screw notices
Loose screws can cause a reliability problem. In the Lenovo computer, this
problem is addressed with special nylon-coated screws that have the following
characteristics:
• They maintain tight connections.
• They do not easily come loose, even with shock or vibration.
• They are harder to tighten.
• Each one should be used only once.
Do the following when you service this machine:
• Keep the screw kit in your tool bag.
• Always use new screws.
• Use a torque screwdriver if you have one.
Tighten screws as follows:
• Plastic to plastic
Turn an additional 90° after the screw head touches the surface of the plastic
part:
Lenovo Tab P10
FRU replacement notices
more than 90°
(Cross-section)
To Next Page
Loading...
Need help?
General