8201BB operating module
for 8200 inverter series
MA8201BB 2.0l
Lenze Drive Systems GmbH, Postfach 10 13 52, D-31763 Hameln
( (+49) 5154 82-0, Fax Service: (+49) 5154 82-1112
These Instructions
describe the handling and the installation of the 8201BB operating module.
are only valid together with the Operating Instructions of the corresponding
frequency inverter.
Description
The 8201BB operating module is used for parameterization of the 8200 frequency
inverters via keypad. It includes a five-digit LCD display and six function keys.
Functions
Parameterization of the frequency inverters
Display of parameters and error messages
Setpoint input via keypad
Controller inhibit and enable via keypad
Parameter transfer to other frequency inverters of the
same series.
- The parameter transfer to frequency inverters of different series is not possible
because of the different code sets!
Application range
Applicable with frequency inverters with the following nameplate data:
Frequency inverter 8200
- 820XE.0x.0x
- 821XE.0x.0x
- 822XE.0x.0x
- 824XE.0x.0x
Assembly
The operating module can be connected to or disconnected from the X1 interface
during operation.
The operating module is ready for operation when a text is displayed after the
initialization.
EDK8201BB
00459192
10/02
To Next Page
Loading...
Need help?
General
