Installation
4-10 820XBA1097
4.2.3 Control connections
4.2.3.1 Control cables
-
We recommend the unilateral screening of all cables for
analog signals to avoid signal distortion.
-
Connect the screens of the control cables as follows:
-820X:
On the front FAST-ON connector.
-
If the control cables are interrupted (terminal strips, relays),
the screens must be reconnected over the shortest possible
distance.
-
Connnect the fixing screw of the setpoint potentiometer to
PE.
4.2.3.2 Assignment of the control terminals
K35.0026
62
7
8
9
K11
K12
K14
20
28
E1
E2
E3
E4
39
FIG 4-5 Position of the control terminals
To Next Page
Loading...
Need help?
General
