Levoit Core 200S User Manual

15
Problem Possible Solution
Air purifier will not turn on or
respond to button controls.
Plug in the air purifier.
Check to see if the power cord is damaged. If it is, stop
using the air purifier and contact Customer Support
(see page 17).
Plug the air purifier into a dierent outlet.
The air purifier is malfunctioning. Contact Customer
Support (see page 17).
Airflow is significantly reduced. Make sure the filter is removed from its packaging and
properly in place (see page 7).
Tap
to increase the fan speed.
Leave 38 cm / 15 inches of clearance on all sides of the air
purifier.
The pre-filter may be clogged by large particles, such as
hair or lint, blocking airflow. Clean the pre-filter
(see page 13).
Replace the filter (see page 14).
Air purifier makes an unusual
noise while the fan is on.
Make sure the filter is properly in place with plastic
packaging removed (see page 7).
Make sure the air purifier is operating on a hard, flat, even
surface.
Replace the filter (see page 14).
The air purifier may be damaged, or a foreign object
may be inside. Stop using the air purifier and contact
Customer Support (see page 17). Do not try to repair
the airpurifier.
Strange smell coming from the
air purifier.
Clean the filter or replace if necessary.
Contact Customer Support (see page 17).
Make sure not to use your air purifier in an area with high
humidity or while diusing essential oils.
TROUBLESHOOTING

Levoit Core 200S Specifications

General

Brand	Levoit
Model	Core 200S
Category	Air Cleaner
Language	English