Name: Levoit Core 300
Brand: Levoit
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Resetting the Check

Filter Indicator

Reset the Check Filter Indicator when:

lights up.

1. Replace the ﬁlter. (see page 14)

2. Turn on the air puriﬁer.

3. Press and hold

for 3 seconds.

will turn o when successfully

reset.

B. The ﬁlter was changed before

lit up.

1. Press and hold

for 3 seconds.

This will turn on

2. Press and hold

again for

3 seconds.

will turn o when successfully

reset.

CARE & MAINTENANCE

Figure 3.1

will light up as a reminder to check the

ﬁlter. Depending on how much you use the

air puriﬁer, the indicator should turn on within

6–8 months. You may not need to replace

your ﬁlter yet, but you should check it when

turns on.

Check Filter Indicator

Cleaning the Air Purifier

1. Unplug before cleaning.

2. Wipe the outside of the air puriﬁer with a

soft, dry cloth. If necessary, wipe the housing

with a damp cloth, then immediately dry.

3. Vacuum the inside of the air puriﬁer.

Filter When to Clean How to Clean When to Replace

Pre-Filter

Every 2–4

weeks

Use a soft brush or vacuum

hose [Figure 3.1]

6–8 months

True HEPA

& Activated

Carbon Filter

Do not clean

The outer pre-ﬁlter should be cleaned

every 2–4 weeks to increase the eciency

and extend the life of your ﬁlter. Clean the

pre-ﬁlter using a soft brush or vacuum hose

to remove hair, dust, and large particles.

[Figure 3.1]

Do not clean the ﬁlter with water

or other liquids.

Cleaning the Filter

Note: Do not clean with abrasive chemicals

or ﬂammable cleaning agents.

Note: Do not clean the True HEPA and

Activated Carbon Filters.

Questions and Answers:

Need help?

Do you have a question about the Levoit Core 300 and is the answer not in the manual?

Levoit Core 300 Specifications

General

Anti-odor filter	Yes
Particle filtration	0.3 µm
Filtering capability	Cigarette smoke, Fine dust, Pollen
Number of filter stages	3
Efficiency	99.97 %
Noise level	50 dB
Certification	FCC, ETL, CA PROP 65
Air purify rate	- m³/h
Noise level (night mode)	24 dB
Timer duration (maximum)	8 h
Timer duration (minimum)	2 h
Operating temperature (T-T)	-10 - 40 °C
Suitable for room area up to	20 m²
Operating relative humidity (H-H)	0 - 85 %
Clean Air Delivery Rate (CADR) (dust)	140 m³/h
Clean Air Delivery Rate (CADR) (smoke)	141 m³/h
Clean Air Delivery Rate (CADR) (pollen)	145 m³/h
Sustainability certificates	ENERGY STAR
AC input voltage	120 V
AC input frequency	60 Hz
Power consumption (max)	45 W
Power consumption (standby)	0.8 W
Control type	Touch
Display type	LCD
Product color	Black, Silver