Levoit Core 600S Series User Manual

16
Resetting the Check
Filter Indicator
Reset the Check Filter Indicator when:
A. lights up red.
1. Replace the filter (see page 17).
2. Turn on the air purifier.
3. Press and hold the button for
3 seconds.
4. will turn o when successfully
reset.
B. The filter was changed before
lit up.
1. Press and hold the button for
3 seconds.
2. The will flash for 3 seconds.
3. will turn o when successfully
reset.
CARE & MAINTENANCE
will light up as a reminder to check the
filter. If you use your air purifier consistently
(24 hours of daily use), the indicator should
turn on after about 6–12 months. You may
not need to change your filter yet, but you
should check it when turns on.
When your air purifier is set up with the
VeSync app, you can also check the app to
see your remaining filter life. You will also
receive a notification from VeSync when it’s
time to check your filter.
The VeSync app uses a scientific algorithm
to determine your filter life based on air
quality, amount of use, and other factors.
Check Filter Indicator
Cleaning the Smart Air Purifier
• Unplug before cleaning.
• Wipe the outside of the air purifier
with a soft, dry cloth. If necessary,
wipe the housing with a damp cloth,
then immediately dry.
• Vacuum the inside of the air purifier.
• Do not clean with abrasive chemicals
or flammable cleaning agents.
Filter When to Clean How to Clean When to Replace
Pre-Filter
Every 24
weeks
Use a soft brush or
vacuum hose
6–12 months
True HEPA
& Activated
Carbon Filter
Do not clean
The outer pre-filter should be cleaned every
2–4 weeks to increase eciency and extend
the life of your filter. Clean the pre-filter using
a soft brush or vacuum hose to remove hair,
dust, and large particles. Do not clean the
filter with water or other liquids.
Cleaning the Filter

Levoit Core 600S Series Specifications

General

Brand	Levoit
Model	Core 600S Series
Category	Air Cleaner
Language	English