6
GETTING STARTED
1. Remove all packaging. Choose a hard,
flat location for the humidifier at least
6 in / 15 cm away from any walls,
furniture, bedding, and appliances. The
surface must be water-resistant.
[Figure 1.1]
1. Remove the top cover from the water
tank. Fill the tank with room temperature
water. Do not fill with warm or hot water.
[Figure 1.4]
Figure 1.1
Figure 1.3
Figure 1.4Figure 1.2
Note: Do not place the humidifier on
towels, carpets, rugs, floors, or any
surfaces with fibers. This will block the air
inlet at the bottom of the humidifier and
cause overheating. [Figure 1.2]
2. Take the water tank o of the base and
remove all tape. [Figure 1.3]
Filling & Refilling
Note:
• We recommend using purified water.
• Avoid using tap water, because
the mineral content is too high and
will create white dust around the
humidifier.