Levoit LV110WP Manual

Figure 1.1
Figure 1.2
+ position
– position
7
EN
GETTING STARTED
1. Remove all packaging from the
water pitcher and filter cartridge.
2. Remove the restrictor caps from the
bottom of the filter. [Figure 1.1]
NOTE:
There may be carbon dust in the
water while rinsing or soaking the filter. This
is normal.
3. Soak the filter cartridge in clean tap
water (submerged completely) for
15 minutes.
4. Rinse the filter cartridge thoroughly
for 10 seconds under running water.
Restrictor Cap Settings
• Place the restrictor cap in the “+”
position if you want water to filter
faster, or in the “-” position if you
want water to filter more thoroughly.
[Figure 1.2]
• You can remove the caps
completely if you want water to filter
as fast as possible.
5. Replace the restrictor caps on the
bottom of the filter.

Levoit LV110WP Specifications

General

Brand	Levoit
Model	LV110WP
Category	Water Filtration Systems
Language	English