Levoit Smart True HEPA Core 300S Series User Manual

13
Resetting the Check
Filter Indicator
Reset the Check Filter Indicator when:
A. lights up red.
1. Replace the filter (see page 14).
2. Turn on the air purifier.
3. Press and hold for 3 seconds.
4. will turn o when successfully
reset.
B. The filter was changed before
lit up.
3. Press and hold for 3 seconds.
4. The will flash for 3 seconds.
5. will turn o when successfully
reset.
CARE & MAINTENANCE
Figure 3.1
will light up as a reminder to check the
filter. You will also receive a notification from
VeSync when it’s time to check your filter, and
you can view your filter life percentage in the
app at any time. Depending on how often you
use the air purifier, the indicator should turn
on within 6–8 months. You may not need to
replace your filter yet, but you should check it
when turns on.
Check Filter Indicator
Cleaning the Smart Air Purifier
• Unplug before cleaning.
• Wipe the outside of the air purifier with
a soft, dry cloth. If necessary, wipe
the housing with a damp cloth, then
immediately dry.
• Vacuum the inside of the air purifier.
• Do not clean with abrasive chemicals or
flammable cleaning agents.
Filter When to Clean How to Clean When to Replace
Pre-Filter
Every 2–4
weeks
Use a soft brush or vacuum
hose [Figure 3.1]
6–8 months
True HEPA
& Activated
Carbon Filter
Do not clean
The outer pre-filter should be cleaned every
2–4 weeks to increase eciency and extend
the life of your filter. Clean the pre-filter using
a soft brush or vacuum hose to remove hair,
dust, and large particles. [Figure 3.1] Do not
clean the filter with water or other liquids.
Cleaning the Filter

Levoit Smart True HEPA Core 300S Series Specifications

General

Brand	Levoit
Model	Smart True HEPA Core 300S Series
Category	Air Cleaner
Language	English