Levoit Smart True HEPA Core 300S Series User Manual

15
Problem Possible Solution
Air purifier will not turn on or
respond to button controls.
Plug in the air purifier.
Check to see if the power cord is damaged. If it is, stop using
the air purifier and contact Customer Support (see 20).
Plug the air purifier into a dierent outlet.
The air purifier may be malfunctioning. Contact Customer
Support (see 20).
Airflow is significantly
reduced.
Make sure the filter is removed from its packaging and
properly in place (see page 6).
Tap to increase the fan speed.
Leave 15 inches / 38 cm of clearance on all sides of the air
purifier.
The pre-filter may be clogged by large particles, such as hair
or lint, blocking airflow. Clean the pre-filter (see page 13).
Replace the filter (see page 14).
Air purifier makes an unusual
noise while the fan is on.
Make sure the filter is properly in place with plastic packaging
removed (see page 6).
Make sure the air purifier is operating on a hard, flat, level
surface.
Replace the filter (see page 14).
The air purifier may be damaged, or a foreign object may
be inside. Stop using the air purifier and contact Customer
Support (see page 20). Do not try to repair the air purifier.
Strange smell coming from
the air purifier.
Clean the filter, or replace if necessary.
Contact Customer Support (see 20).
Make sure not to use your air purifier in an area with high
humidity or while diusing essential oils.
TROUBLESHOOTING

Levoit Smart True HEPA Core 300S Series Specifications

General

Brand	Levoit
Model	Smart True HEPA Core 300S Series
Category	Air Cleaner
Language	English