46
Lexicon
AC-3 Effects and Parameters
Parameter Initial Value Range
AC-3 STATUS (display only — not user adjustable)
COMPRESSION OFF AUTO, ON, OFF
RE-EQUALIZER OFF ON, OFF
BASS ENHANCE OFF ON, OFF
REAR DLY OFFSET 5ms 0-20ms
SIDE LEVEL +00dB OFF, -30dB to +05dB
REAR LEVEL +00dB OFF, -30dB to +05dB
LFE MIX LEVEL +0.0dB -10.0dB to +0.0dB
SUBWOOFER LVL +00dB OFF, -30dB to +05dB
CUSTOM
This effect enhances playback of Dolby Digital music recordings, or Dolby
Digital film soundtracks with strong musical content. This effect contains
many of the features found in 5.1 LOGIC 7, with settings that are more
appropriate for music.
5.1 Music
Parameter Initial Value Range
AC-3 STATUS (display only — not user adjustable)
COMPRESSION OFF AUTO, ON, OFF
CENTER MIX 16 0-30
SURROUND MIX +2dB -5 to +5dB
CENTER DLY SAMPLES +0 -127 to +127
MASTER LEVEL +5dB -5dB to +5dB
LFE MIX LEVEL +0.0dB -20.0dB to +0.0dB
SUBWOOFER LVL +00dB OFF, -30dB to +05dB
CUSTOM
This effect mixes Dolby Digital 5.1 information for two-channel playback.
These soundtracks can be recorded onto two-channel formats, or played
back through left and right front speakers. The mix is designed to play back
with full surround when decoded through Logic 7. In mixing a film with
very heavy use of the Low Frequency Effects Channel, it may be desirable
to lower LFE MIX LEVEL.
5.1 2-Channel
To Next Page
Loading...
Need help?
General
