• Flex, fan, and align the paper edges before loading.
• Do not use paper that has been cut or trimmed by hand.
• Do not mix paper sizes, weights, or types in the same tray.
• Make sure that the paper size and type are set correctly on the computer or printer control panel.
• Store paper according to manufacturer recommendations.
Identifying jam locations
Note: When Jam Recovery is set to On or Auto, the printer reprints jammed pages.
Jam locations
1 Door C
2 Door D
3 Multipurpose feeder
4 3000‑sheet tray
5 2 x 500‑ or 2500‑sheet tray
6 Staple finisher
Clearing jams 131
To Next Page
Loading...
Need help?
General
