LEYBOLD TURBO.CONTROL i User Manual

10
300680364_002_C0 - 12/2017 - © Leybold
Service
Cleaning
Remove dust on the surfaces using a moist piece of cloth
only to prevent the creation of any sparks.
Changing the Battery
When the battery is missing or empty, no real time clock
can be saved in the Data Logging. The function of the the
TURBO.CONTROL i is not affected.
Disconnect the device from voltage. Remove the rubber
cover on the rear side to replace the battery
Use only the intended battery type CR1/3N.
We recommend a changing interval of 7 years.
Leybold Service
Whenever you send us in equipment, indicate whether the
equipment is contaminated or is free of substances which
could pose a health hazard. If it is con taminated, specify
exactly which substances are in volved. You must use the
form we have prepared for this purpose.
www.leybold.com  Downloads  Download Documents.
Attach the form to each device.
This statement detailing the type of contamination is
required to satisfy legal requirements and for the protection
of our employees.
We must return to the sender any equipment which is not
accompanied by a contamination statement.

LEYBOLD TURBO.CONTROL i Specifications

General

Brand	LEYBOLD
Model	TURBO.CONTROL i
Category	Controller
Language	English