LG 21HK512D-B.AWPQ User Manual

10
ENGLISH
Stand View
Unit: mm
100
100
429.3
18
247.9
INITIAL INSTALLATION
To attach the LCD monitor to your system, follow these instructions
1 Turn off the power of your computer.
2 For connecting the PC: Connect the DVI-D cables or DisplayPort cables to the connector of the display card
in your system. Tighten all screws.
3 Connect the DVI-D cables or DisplayPort cables to the connector on the back of the monitor.
4 Connect one end of the power cord to the monitor and the other end to the power outlet.
5 The AC switch on the back of the monitor must be turned on. Then turn on the monitor with the OSD
Control Knob.
6 For further adjustments, refer to the OSD section of this manual.
NOTE
• Incorrect cable connections may result in irregular operation, damage display quality / components of LCD
module and/or shorten the module’s life.
• Please refer to Caution of "Assembly And Preparing" section for proper selection of your Power cord.
• The AC switch is a real on/off switch. If this switch is on the Off position, the monitor cannot be turned on by
using the OSD Control Knob.
• If you have any questions, please refer to the " Troubleshooting" section of this manual.

LG 21HK512D-B.AWPQ Specifications

General

Brand	LG
Model	21HK512D-B.AWPQ
Category	Medical Equipment
Language	English