9
ENG
ENGLISH
y
Illustrations in this document represent typical
procedures, so they may look different from the
actual product.
y
Do not carry the monitor upside down by just
holding the stand base. This may cause the
monitor to fall off the stand and could result in
personal injury.
y
When lifting or moving the monitor, do not touch
the monitor screen. The force applied to the
monitor screen may cause damage to it.
y
Do not apply foreign substances (oils, lubricants,
etc.) to the screw parts when assembling the
product. (Doing so may damage the product.)
y
Applying excessive force when tightening
screws may cause damage to the monitor.
Damage caused in this way will not be covered
by the product warranty.
Mounting on a table
1
Lift and tilt the Monitor set into its upright
position on a table.
Leave a 3.94 inches space from the wall for
proper ventilation.
2
Connect the Power cord to the monitor, then
plug the power cord into the wall outlet.
3
Press the (Power) button on the front of the
monitor to turn on the monitor.
3.94 inches
3.94 inches
3.94 inches
3.94 inches
CAUTION
CAUTION
NOTE
y
You can disassemble the stand in the reverse
order of the assembly.
y
Unplug the power cord prior to moving or
installing the monitor. There is risk of electric
shock.