9
ENGLISH
Mounting on a Table
(Image shown may differ from your TV.)
1
Lift and tilt the TV into its upright position on a
table.
- Leave a 10 cm (4 inches) (minimum) space from
the wall for proper ventilation.
10 cm
10 cm
10 cm
10 cm
(4 inches)
2
Connect the power cord to a wall outlet.
CAUTION
Do not place the TV near or on sources of heat, as
this may result in fire or other damage.
Using the Kensington Security
System (optional)
(Depending upon model)
(Image shown may differ from your TV.)
The Kensington security system connector is located
at the rear of the TV. For more information of
installation and using, refer to the manual provided
with the Kensington security system or visit
http://
www.kensington.com.
Connect the Kensington
security system cable between the TV and a table.
NOTE
The Kensington security system is optional. You can
obtain additional accessories from your local dealer.
Basic functions
When the TV is turned off, place
your finger on the joystick button,
press it once, and release it.
Power On
When the TV is turned on, place
your finger on the joystick button,
press it once for a few seconds,
and release it. All running apps will
close.
Power Off
Place your finger on the joystick
button and move it left or right to
adjust the volume level.
Volume Control
Place your finger on the joystick
button and move it up or down to
adjust the channel.
Channels
Control
NOTE
Move the joystick button up, down, left, or right.
Be careful not to press it. If you press it first, you
may not be able to adjust the volume or scroll
through the channels.
Adjusting the Menu
When the TV is turned on, press the joystick button
one time. You can adjust the menu items moving the
joystick button up, down, left, or right.
Turns the power off.
Accesses the quick settings. (Depending upon
model)
Clears on-screen displays and returns to TV
viewing.
Changes the input source.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
