LG 32LK450 User Manual

34
ENG
ENGLISH
ASSEMBLING AND PREPARING
Securing the TV to a wall (optional)
1
Insert and tighten the eye-bolts, or TV brackets
and bolts on the back of the TV.
- If there are bolts inserted at the eye-bolts
position, remove the bolts first.
2
Mount the wall brackets with the bolts to the
wall.
Match the location of the wall bracket and the
eye-bolts on the rear of the TV.
3
Connect the eye-bolts and wall brackets tightly
with a sturdy rope.
Make sure to keep the rope horizontal with the
flat surface.
CAUTION

Make sure that children do not climb on or
hang on the TV.
NOTE

Use a platform or cabinet that is strong and
large enough to support the TV securely.

Brackets, bolts and ropes are optional. You
can obtain additional accessories from your
local dealer.
Using the Kensington security system (optional)
The Kensington security system connector is
located at the rear of the TV. For more information
of installation and using, refer to the manual
provided with the Kensington security system or
visit http://www.kensington.com.
Connect the Kensington security system cable
between the TV and a table.
NOTE

The Kensington security system is optional.
You can obtain additional accessories from
your local dealer.

LG 32LK450 Specifications

General

Product color	Black
Panel mounting interface	200 x 100 mm
Product weight	17.9 lbs
Depth (imperial)	2.9 \
Height (imperial)	19.8 \
Power requirements	100 - 240 V, 50/60 Hz
Annual energy consumption	119 kWh
Package weight (imperial)	26.7 lbs
Set depth (with stand) (inch)	8.1 \
Set width (with stand) (inch)	31.3 \
Set height (with stand) (inch)	22.4 \
Weight (with stand) (imperial)	20.3 lbs
Display diagonal	31.5 \
Display technology	LCD
Native aspect ratio	16:9
Native refresh rate	60 Hz
Contrast ratio (dynamic)	100000:1
Display diagonal (metric)	80 cm
Supported graphics resolutions	1920 x 1080 (HD 1080)
Tuner type	Analog & digital
AV input	2
HDMI ports quantity	3
SCART ports quantity	0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Digital audio optical out	1
Number of OSD languages	4
On Screen Display (OSD) languages	ENG, ESP, FRE, KOR
Sustainability certificates	ENERGY STAR
Power consumption (standby)	0.3 W
Power consumption (typical)	81 W
RMS rated power	20 W
Wi-Fi	No

Weight and Dimensions

Weight (without stand)	8126 g