LG 32LN520B User Manual

ENGLISH
15
ASSEMBLING AND PREPARING
Setting up the TV
You can mount your TV to a wall or attach the stand if you wish to place the TV on an entertainment center
or other furniture.
Attaching the stand
If you are not mounting the TV to a wall, use the following instructions to attach the stand.

When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat
surface to protect the screen from scratches.

Make sure that the screws are fastened tightly. (If they are not fastened securely enough, the TV
may tilt forward after being installed.)

Do not tighten the screws with too much force; otherwise they may be damaged and come loose
later.
CAUTION

Remove the stand before installing the TV on a wall mount by performing the stand attachment in
reverse.
NOTE
Stand Body
Stand Base
Front
1
3 EA
P5 x 25
3
4 EA
M4 x 14
2

LG 32LN520B Specifications

General

Display diagonal	32 \
Display resolution	1366 x 768 pixels
Native aspect ratio	16:9
Native refresh rate	50 Hz
LED backlighting type	Direct-LED
Motion interpolation technology	MCI (Motion Clarity Index) 100
3D	No
Annual energy consumption	51 kWh
Tuner type	Digital
Analog signal format system	-
Digital signal format system	DVB-C, DVB-T
RMS rated power	10 W
Number of speakers	2
HDMI version	1.4
DVI-D ports quantity	0
USB 2.0 ports quantity	1
Audio formats supported	AAC, AC3, MP3, PCM
Image formats supported	JPG, JPS, MPO
Video formats supported	DIVX HD
Product color	Black
Panel mounting interface	100 x 100 mm
Power consumption (standby)	0.3 W
Power consumption (typical)	35 W

Weight and Dimensions

Depth (with stand)	209 mm
Height (with stand)	493 mm
Weight (with stand)	5600 g
Depth (without stand)	88.4 mm
Width (without stand)	738 mm
Height (without stand)	447 mm
Weight (without stand)	4900 g