44
WATCHING TV /PROGRAMME CONTROL
WATCHING TV / PROGRAMME CONTROL
1
5432
All stations which can be received are stored by this method. It
is recommended that you use Auto tuning during installation of
this TV.
It is not possible to use this function while recording a pro-
gramme.
AUTO PROGRAMME TUNING
(IN ANALOGUE MODE)
Press the
MMEENNUU
button and then
D
or
E
button to
select the SETUP menu.
Press the
G
button and then
D
or
E
button to select
Auto Tuning.
Press the
G
button to select System. Select a TV
system with the
F
or
G
button;
L : SECAM L/L’ (France)
BG : PAL B/G, SECAM B/G (Europe / East Europe /
Asia / New Zealand / M.East / Africa / Australia)
I : PAL I/II (U.K. / Ireland / Hong Kong / South
Africa)
DK : PAL D/K, SECAM D/K (East Europe / China /
Africa / CIS)
Press the
E
button to select Storage From.
Select the initial programme number with the
F
or
G
button or NUMBER buttons on the Storage From
menu.
Press the
E
button to select Start.
The station name is stored for stations which broad-
cast VPS (Video Programme Service), PDC
(Programme Delivery Control) or TELETEXT data.
If no station name can be assigned to a station, the
channel number is assigned and stored as C (V/UHF
01-69) or S (Cable 01-47), followed by a number.
To stop auto tuning, press the MENU button.
When auto tuning is complete, the Programme
Edit menu appears on the screen.
See the ‘Programme Edit’ section to edit the
stored programme.
Auto Tuning G
Manual Tuning
Programme Edit
System
Storage From
Start
BG
2
To Next Page
Loading...
Need help?
General
