To Next Page

To Previous Page

ENGLISH

PRECAUTIONS FOR USE

Dust

The warranty will not cover any damage caused by using the product in an excessively dusty environment.

Afterimage

• After-image appears when the product is turned off.

- Pixels may be damaged rapidly if a still image is displayed on the screen for a long period of time. Use the screen-

saver function.

- Switching from a screen with high differences in luminance (black and white or grey) to a darker screen may cause

an afterimage. This is normal due to the display characteristics of this product.

• When the LCD screen is in a still pattern for extended periods of use, a slight voltage difference may occur between

the electrodes that operate the liquid crystal (LC). The voltage difference between the electrodes increases over time

and tends to keep the liquid crystal aligned in one direction. At this time, the previous image remains, which is called

an afterimage.

• Afterimages do not occur when continuously changing images are used but take place when a certain screen is fixed

for a long time. The following are operational recommendations for reducing the occurrence of afterimages when

using a fixed screen. The maximum recommended time for switching the screen is 12 hours. Shorter cycles are better

for preventing afterimages.

• Recommended Usage Condition

Other manuals for LG 32SM5J

Questions and Answers:

Need help?

Do you have a question about the LG 32SM5J and is the answer not in the manual?

General

Haze rate	1 %
Touchscreen	-
Response time	10 ms
Display diagonal	32 \
Display brightness	400 cd/m²
Display technology	IPS
Contrast ratio (dynamic)	1000000:1
Contrast ratio (typical)	1100:1
Operating hours (hours/days)	24/7
Orientation	Horizontal/Vertical
Product color	Black
Product design	Digital signage flat panel
Panel mounting interface	200 x 200 mm
HDMI version	2.2
USB ports quantity	1
HDMI ports quantity	3
Internal memory	8 GB
Operating system installed	Web OS
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 80 %
AC input voltage	100 - 240 V
Heat dissipation	187.67 BTU/h
AC input frequency	50 - 60 Hz
Power consumption (standby)	- W
Power consumption (typical)	55 W
Heat dissipation (max)	255.911 BTU/h
Sustainability certificates	ErP
RMS rated power	10 W
Number of built-in speakers	2
Cables included	AC, HDMI, RS-232
Harmonized System (HS) code	85285210