30
ENG
ENGLISH
ASSEMBLING AND PREPARING
Mounting on a table
1
Lift and tilt the TV into its upright position on a
table.
- Leave a 10 cm (4 inches) (minimum) space
from the wall for proper ventilation.
10 cm
10 cm
10 cm
10 cm
2
Connect the power cord to a wall outlet.
CAUTION
Do not place the TV near or on sources
of heat, as this may result in fire or other
damage.
NOTE
Swivel 20 degrees to the left or right and
adjust the angle of the TV to suit your
view.
2020
Securing the TV to a table
(For 26/32LK330, 32/42LK430, 32/37/42LK450,
42LK451C, 32/37/42LK453C, 42LK520,
32LV2500, 32LV2520, 32LV3400, 32/37LV3500,
32
LV3520
)
Fix the TV to a table to prevent from tilting
forward, damage, and potential injury.
Mount the TV on a table, and then insert and
tighten the supplied screw on the rear of the
stand.
WARNING
To prevent TV from falling over, the TV
should be securely attached to the floor/wall
per installation instructions. Tipping, shaking,
or rocking the TV may cause injury.
(4 inches)
To Next Page
Loading...
Need help?
General
