- 4 -
LGE Internal Use OnlyCopyright©2007 LG Electronics. Inc. All right reserved.
Only for training and service purposes
SPECIFICATIONS
NOTE : Specifications and others are subject to change without notice for improvement
.
V Application Range
This spec is applied to the 42” PLASMA TV used PD73A Chassis.
V Specification
Each part is tested as below without special appointment.
1) Temperature : 25±5°C (77±9°F), CST : 40±5
2) Relative Humidity: 65±10%
3) Power Voltage: Standard Input voltage (100-240V~, 50/60Hz)
* Standard Voltage of each product is marked by models.
4) Specification and performance of each parts are followed each drawing and specification by part number in accordance with SBOM.
5) The receiver must be operated for about 20 minutes prior to the adjustment.
V Test Method
1) Performance : LGE TV test method followed.
2) Demanded other specification
Safety : CE, IEC specification
EMC : CE, IEC
V General Specification
1. Module Specification ( 42” XGA MODULE )
Display Screen Device
Aspect Ratio
PDP Module
Operating Environment
Storage Environment
Input Voltage
1
2
3
4
5
6
No Item Specification Remark
42” Wide Color Display Module
16:9
PDP42X4A,
RGB Closed Type, Film Filter
1)Temp. : 0~40deg
2)Humidity : 20~80%
3)Temp. : -20~60deg
4)Humidity : 10~90%
100-240V~, 50/60Hz
Plasma Display Panel
LGE SPEC.
Maker LG
Chassis
PD73A 42PC35
UK, German, Italy, France, Sweden, Finland, Spain,
Netherlands, Belgium, Luxemburg, Greece, Denmark,
Czech, Austria, Poland, Portugal, Norway, Rumania,
Hungary , Bulgaria, Croatia, Serbia, Swiss, Slovenia, Russia
LG
Model Name Market Brand Remark
42PC35
Safety : IEC/EN60065
EMI : EN55013
EMS : EN55020
UK, German, Italy, France, Sweden, Finland,
Spain, Netherlands, Belgium, Luxemburg,
Greece, Denmark, Czech, Austria, Poland,
Portugal, Norway, Rumania, Hungary , Bulgaria,
Croatia, Serbia, Swiss, Slovenia, Russia
Model ApplianceMarket
TEST
Remark
To Next Page
Need help?
General
