ENGLISH
15
ASSEMBLING AND PREPARING
Mounting on a table
1
Lift and tilt the TV into its upright position on a table.
- Leave a 10 cm (minimum) space from the wall for
proper ventilation.
10 cm
10 cm
10 cm (4 inches)
10 cm
2
Connect the power cord to a wall outlet.
y
Do not place the TV near or on sources of heat, as
this may result in fire or other damage.
CAUTION
y
Install the product on a flat surface for easy swivel.
Make sure to use the TV cabinet or stand that can
properly support the TV.
y
After installing the TV, the angle of the screen can
be adjusted to the left or right.
y
When adjusting the angle, make sure there are
no objects near the TV and the TV has enough
distance from the wall. A space of at least 5 cm
on the front and 10 cm on the back should be
available. Otherwise, the product could fall due to
balance problems, which may cause personal injury
or damage to the product.
CAUTION
Adjusting the angle of the TV to suit view
Swivel 10 degrees to the left or right and adjust the
angle of the TV to suit your view.
(For 47LA6900, 47LA7400)
1010
Swivel 8 degrees to the left or right and adjust the angle
of the TV to suit your view.
(For 55LA6900, 55LA6950, 55LA7400, 60LA7400)
8
8
To Next Page
Loading...
Need help?
General
