ENGLISH
16
ASSEMBLING AND PREPARING
Securing the TV to a wall (optional)
(Depending on model)
1
Insert and tighten the eye-bolts, or TV brackets and
bolts on the back of the TV.
- If there are bolts inserted at the eye-bolts position,
remove the bolts first.
2
Mount the wall brackets with the bolts to the wall.
Match the location of the wall bracket and the eye-
bolts on the rear of the TV.
3
Connect the eye-bolts and wall brackets tightly with
a sturdy rope.
Make sure to keep the rope horizontal with the flat
surface.
y
Make sure that children do not climb on or hang on
the TV.
CAUTION
y
Use a platform or cabinet that is strong and large
enough to support the TV securely.
y
Brackets, bolts and ropes are optional. You can
obtain additional accessories from your local dealer.
NOTE
Tidying cables
1
Gather and bind the cables with the cable holder on
the back of the TV.
2
Gather and bind the cables with the cable
management clip.
⨲㘶ᖂ2
㏪ⱞ⋾#Ɐᴏ
y
Do not move the TV by holding the cable holder
and cable management clip, as the cable holders
may break, and injuries and damage to the TV may
occur.
CAUTION
Cable Holder
Cable Management Clip
To Next Page
Loading...
Need help?
General
