43
ENGENGLISH
MAGIC REMOTE FUNCTIONS
How to use Magic Remote
y
Shake the Magic Remote
slightly to the right and left
or press
(Home), /
INPUT,
buttons to make
the pointer appear on the
screen.
»
The pointer will appear
when you turn the Wheel
button. (Depending on
model)
y
If the pointer has not been
used for a certain period
of time or Magic Remote is
placed on a at surface, then
the pointer will disappear.
y
If the pointer is not
responding smoothly, you
can reset the pointer by
moving it to the edge of the
screen.
y
The Magic Remote depletes
batteries faster than a
normal remote due to the
additional features.
Voice recognition (Depending on model)
Network connection is required to use the
voice recognition function.
1 Press the Voice recognition button.
2 Speak when the voice display window
appears on the left of the TV screen.
• The voice recognition may fail when you
speak too fast or too slow.
• Use the Magic Remote no further than
10 cm from your face.
• The recognition rate may vary
depending on the user’s characteristics
(voice, pronunciation, intonation and
speed) and the environment (noise and
TV volume).
Registering Magic Remote
How to register the Magic Remote
To use the Magic Remote, first pair
it with your TV.
1 Put batteries into the Magic
Remote and turn the TV on.
2 Point the Magic Remote at your
TV and press the Wheel(OK) on
the remote control.
»
If the TV fails to register the
Magic Remote, try again after
turning the TV off and back
on.
How to deregister the Magic Remote
(BACK)
(Home)
Press the
(BACK) and
(Home) buttons at the same time,
for five seconds, to unpair the
Magic Remote with your TV.
»
Pressing and holding the
(EXIT to LIVE) button will let
you cancel and re-register
Magic Remote at once.
To Next Page
Loading...
Need help?
General
