Connecting to a PC
It is recommended to use the HDMI connection for the best image quality.
Depending on the graphics card, DOS mode video may not work if a HDMI to DVI Cable is in use.
In PC mode, there may be noise associated with the resolution, vertical pattern, contrast or
brightness. If noise is present, change the PC output to another resolution, change the refresh rate
to another rate or adjust the brightness and contrast on the PICTURE menu until the picture is clear.
The synchronization input form for Horizontal and Vertical frequencies is separate.
Depending on the graphics card, some resolution settings may not allow the image to be positioned
on the screen properly.
NOTE
HDMI Connection, DVI to HDMI Connection or RGB Connection
Choose method A, B or C to make connection.
Method A: HDMI Connection
HDMI
1
2
/ DVI IN
RGB OUT (PC)
AUDIO OUT
AUDIO IN
(RGB/DVI)
RGB IN (PC)
AUDIO OUT
DVI OUT
AUDIO IN
(RGB/DVI)
1
2
/ DVI IN
3
IN
(*Not Provided)
Choose any HDMI input port to connect.
It does not matter which port you use.
PC
ENGLISH
27
MAKING CONNECTIONS
To Next Page
Loading...
Need help?
General
