Mounting on a table
1
Lift and tilt the TV into its upright position on a
table.
- Leave a 10 cm (4 inches) (minimum) space
from the wall for proper ventilation.
10 cm
10 cm
10 cm
10 cm
(4 inches)
2
Connect the power cord to a wall outlet.
CAUTION
Do not place the TV near or on sources
of heat, as this may result in fire or other
damage.
Adjusting the angle of the TV to suit view
Swivel 10 degrees to the left or right and adjust
the angle of the TV to suit your view.
10˚10˚
NOTE
When adjusting the angle of the TV, watch
out for your fingers.
»
Personal injury may occur if hands or fingers are
pinched. If the product is tilted too much, it may fall,
causing damage or injury.
Securing the TV to a table
(Depending on model)
Fix the TV to a table to prevent from tilting
forward, damage, and potential injury.
1
Connect the Desk-mount Cables to the Stand
Base using the Bracket Screws.
2
Fix the Desk-mount Cables to a table using the
Desk-mount Screws.
3
Once the TV is fixed, move the table close to
the wall. Children may go in, causing injuries.
M4 x 8
2 EA
WARNING
To prevent TV from falling over, the TV
should be securely attached to the floor/wall
per installation instructions. Tipping, shaking,
or rocking the TV may cause injury.
ENGLISH
18
ASSEMBLING AND PREPARING
To Next Page
Loading...
Need help?
General
Weight and Dimensions
