LG 49UB8200 User Manual

32
ENGLISH
REMOTE CONTROL
REMOTE CONTROL
The descriptions in this manual are based on the buttons on the remote control.
Please read this manual carefully and use the TV correctly. To install batteries, open
the battery cover, replace batteries (1.5 V AAA) matching the
and ends to
the label inside the compartment, and close the battery cover. Failure to match the
correct polarities of the battery may cause the battery to burst or leak, resulting
in fire, personal injury, or ambient pollution. To remove the batteries, perform the
installation actions in reverse.
f Do not mix old and new batteries, as this may damage the remote control.
CAUTION
This remote uses infrared light. When in use, it should be pointed in the direction of the TV’s remote
sensor.
(POWER) Turns the TV on or off.
CAPTION Activates or deactivates the subtitles.
AV MODE Selects an AV mode.
RATIO Resizes an image.
INPUT Changes the input source. Turns the TV on if it is off.
Number button Enters numbers.
- (Dash) Inserts a dash between numbers such as 2-1 and 2-2.
LIST Accesses the saved channel list.
FLASHBK Alternates between the two last channels selected (pressing repeatedly).
VOL Adjusts the volume level.
FAV Accesses your favorite channel list.
INFO
Shows information on the current program.
MUTE
Mutes all sounds.
CH Scrolls through the saved channels.
PAGE Moves to the previous or next screen.
SETTINGS Accesses the main menu.
SMART
Accesses the Home menu.
MY APPS Shows the list of Apps.
Navigation buttons (up/down/left/right) Scrolls through menus or options.
OK
Selects menus or options and confirms your input.
BACK Returns to the previous screen.
Q.MENU Accesses the quick menu.
EXIT Clears all on-screen displays and returns to TV viewing.
Color buttons These access special functions in some menus.
(
: Red, : Green, : Yellow, : Blue)
Control buttons (
, , , , ) Controls the SIMPLINK compatible devices
(USB,SIMPLINK).
Accesses the AV devices connected to the TV; Opens the SIMPLINK
menu.
SLEEP Sets the length of time until the TV to turns off.
VD/
Enables VD function. SAP (Secondary Audio Program) feature can also be
enabled by pressing the VD key.
TV Returns to the last TV channel.
(For UB8000/UB8200/UB9200 Series)

LG 49UB8200 Specifications

General

Screen shape	Flat
Response time	- ms
Display diagonal	49 \
Display brightness	- cd/m²
Native aspect ratio	16:9
LED backlighting type	-
Supported video modes	1080i, 1080p, 720p
3D	No
Network streaming services supported	HuluPlus, Netflix, YouTube
Tuner type	Analog & digital
Video apps	YouTube
Audio decoders	Dolby Digital, Dolby Digital DTS
RMS rated power	20 W
Number of speakers	2
HDMI ports quantity	3
DVI-D ports quantity	0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Consumer Electronics Control (CEC)	SimpLink
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	1
Control type	Buttons
Audio formats supported	AAC, AC3, EAC3, HE-AAC, MP3, PCM
Image formats supported	JPEG XR
Video formats supported	DIVX HD
Product color	Black
Panel mounting interface	400 x 400 mm
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.3 W
Package depth	175.2 mm
Package width	1196.3 mm
Package height	739.1 mm
Package weight	21500 g

Weight and Dimensions

Depth (with stand)	248.9 mm
Height (with stand)	683.2 mm
Weight (with stand)	18007 g
Depth (without stand)	38.1 mm
Width (without stand)	1092.2 mm
Height (without stand)	645.1 mm
Weight (without stand)	17508 g