EasyManuals Logo
Home>LG>Plasma TV>50PJ350

LG 50PJ350 User Manual

LG 50PJ350
166 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #39 background imageLoading...
Page #39 background image
39
PREPARATION
SECURING THE TV TO THE WALL TO PREVENT FALLING
WHEN THE TV IS USED ON A STAND
We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards.
Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward
direction, potentially causing injury or damaging the product.
Caution: Please make sure that children don’t climb on or hang from the TV.
Insert the eye-bolts (or TV brackets and bolts) to tighten the product to the wall as shown in the
picture.
* If your product has the bolts in the eye-bolts position before inserting the eye-bolts, loosen the
bolts.
* Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.
Secure the wall brackets with the bolts (sold separately) to the wall. Match the height of the bracket
that is mounted on the wall to the holes in the product.
Ensure the eye-bolts or brackets are tightened securely.
Use a sturdy rope (sold separately) to tie the product. It is safer to tie the
rope so it becomes horizontal between the wall and the product.
You should purchase necessary components to prevent the TV from tipping over (when not using a
wall mount).
Image shown may differ from your TV.
!
NOTE
Use a platform or cabinet strong enough and large enough to support the size and weight of
the TV.
To use the TV safely make sure that the height of the bracket on the wall and the one on the TV are
the same.

Table of Contents

Other manuals for LG 50PJ350

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the LG 50PJ350 and is the answer not in the manual?

LG 50PJ350 Specifications

General IconGeneral
Depth55.8 mm
Height721.36 mm
Weight27600 g
Pixel pitch0 mm
Audio systemMono/Stereo/Dual (MTS/SAP), Dolby Digital
Product colorBlack
LED indicatorsStand-by
RMS rated power20 W
Display diagonal50 \
Depth (with stand)309.9 mm
Display brightness1500 cd/m²
Display resolution1365 x 768 pixels
Display technologyPlasma
Power requirements100V - 240V AC, 50/60Hz
Width (with stand)1170.9 mm
Auto channel searchYes
HDMI ports quantity3
Height (with stand)782.3 mm
High frequency rate600 Hz
Weight (with stand)30000 g
USB 2.0 ports quantity1
Contrast ratio (dynamic)3000000:1
Contrast ratio (typical)-
Panel mounting interface400 x 400 mm
Lifetime to 50% brightness100000 h
Power consumption (standby)0.1 W
Component video (YPbPr/YCbCr) in2

Related product manuals