LG 50PJ350 User Manual

EXTERNAL EQUIPMENT SETUP
EXTERNAL EQUIPMENT SETUP
46
VCR SETUP
Antenna Connection
C IN
ERVICE)
UDIO R
DIO
R
ANTENNA
IN
CABLE IN
L R
S-VIDEO VIDEO
AUDIO
OUTPUT
SWITCH
ANT IN
ANT OUT
Wall Jack
Antenna
1. How to connect
1
Connect the RF antenna out socket
of the VCR to the ANTENNA/CABLE
IN socket on the TV.
2
Connect the antenna cable to the RF
antenna in socket of the VCR.
2. How to use
ꔛ
Set VCR output switch to 3 or 4 and
then tune TV to the same channel num-
ber.
ꔛ
Insert a video tape into the VCR and
press PLAY on the VCR (Refer to the
VCR owner’s manual).
1
2
Composite (RCA) Connection
RGB IN (PC)
AUDIO IN
RGB/DVI
(DVI)
OPTICAL
DIGITAL
AUDIO OUT
COMPONENT IN
RS-232C IN
( CONTROL&SERVICE)
1 2
VIDEO
AUDIO
YP B P R
L R
AV IN
VIDEO AUDIO
L(MONO)
R
S-VIDEO
OUTPUT
SWITCH
ANT IN
ANT OUT
L R
VIDEO
AUDIO
ANTENNA
IN
CAB
1. How to connect
1
Connect the AUDIO/VIDEO jacks between TV
and VCR. Match the jack colors (Video = yellow,
Audio Left = white, and Audio Right = red)
2. How to use
ꔛ
Insert a video tape into the VCR and press PLAY
on the VCR.
(
Refer to the VCR owner’s manual.
)
ꔛ
Select the AV, AV1 or AV2* input source on the TV
using the INPUT button on the remote control.
!
NOTE
► If you have a mono VCR, connect the audio cable
from the VCR to the AUDIO L/MONO jack of the TV.
1
* AV2: For 42/50PJ250, 42/50PJ350, 32LD350,
32/42LD420, 32/42LD420C, 32/37/42/47LD460,
37/42LD461C, 32/37/42/47LD465,
32/37/42/47/55LE5300, 32/42/47/55LE4600

LG 50PJ350 Specifications

General

Depth	55.8 mm
Height	721.36 mm
Weight	27600 g
Pixel pitch	0 mm
Audio system	Mono/Stereo/Dual (MTS/SAP), Dolby Digital
Product color	Black
LED indicators	Stand-by
RMS rated power	20 W
Display diagonal	50 \
Depth (with stand)	309.9 mm
Display brightness	1500 cd/m²
Display resolution	1365 x 768 pixels
Display technology	Plasma
Power requirements	100V - 240V AC, 50/60Hz
Width (with stand)	1170.9 mm
Auto channel search	Yes
HDMI ports quantity	3
Height (with stand)	782.3 mm
High frequency rate	600 Hz
Weight (with stand)	30000 g
USB 2.0 ports quantity	1
Contrast ratio (dynamic)	3000000:1
Contrast ratio (typical)	-
Panel mounting interface	400 x 400 mm
Lifetime to 50% brightness	100000 h
Power consumption (standby)	0.1 W
Component video (YPbPr/YCbCr) in	2