107
TIME MACHINE
TIME MACHINE (PAUSE & REPLAY OF LIVE TV)
This function allows the unit to automatically record live TV and make it available for viewing at any time.
With the Time Machine turned on, you may pause and rewind normal TV viewing at any time without
missing any of the live broadcast.
Time Machine and Recording functions may not work if the signal strength is weak.
This function is only operated after initializating USB Device.
1
Connect the USB device to the USB IN or USB IN1/
TimeMachine Ready
jacks on the side of TV.
2
To use the USB device (over 40 GB) for Timemachine,
execute USB Device Initialization.
ꔛ
It initializes the HDD connected to the USB as disk mode
for Timemachine.
ꔛ
It is activated only when the USB HDD available for
Timemachine is connected.
ꔛ
When USB Device Initialization is executed, all the data
stored in the USB device is deleted.
ꔛ
While performing USB Device Initialization, do not
remove the USB device. It may cause error on the TV and
the storage device.
USB device Initialization
Cancel
OK
Initializing will delete all existing data in
the USB device. Once initialized to DVR
format, the USB device cannot be used
with PC. To continue to initialize, select
OK.
!
Cancel
OK
To copy recordings
USB storage device must be
formatted
to Timeshift format.
Formattingwill delete
all existing data.
Continue to format?
!
ꔛ
When initialization is completed, a
popup notice of completion is dis-
played and the connected USB HDD
is available for Timemachine.
ꔛ
Depending on the capacity of the
USB device, the initialization time
may vary.
ꔛ
The initialized USB device is not rec-
ognized by the PC.
ꔛ
When a USB device of less than 40
GB is connected, the USB Device
Initialization is not activated.
ꔛ
Supported maximum external HDD
size for back-up is up to 1TB.
i.e)
T IN3
B PR
USB IN 1 USB IN 2
Time Machine
Ready
1
Select OK to initialize the USB
device.
2
Select OK.
3
Select On or Off.
Initialization completed. Ready to record.
Time Machine Mode
◀ On ▶
OK
i