C
D
C
Wheel (OK) Press the center of the Wheel
button to select a menu. You can change
programmes by using the Wheel button.
(up/down/left/right) Press
the up, down, left or right button to scroll
the menu. If you press buttons
while the pointer is in use, the pointer will
disappear from the screen and Magic Remote
will operate like a general remote control. To
display the pointer on the screen again, shake
Magic Remote to the left and right.
Shows programme guide.
(Screen Remote) Displays the Screen
Remote.
* Accesses the Universal Control Menu.
(Depending on model)
D
Used for viewing 3D video. (Only 3D models)
(Voice recognition)
(Depending on model)
Network connection is required to use the
voice recognition function.
1 Press the voice recognition button.
2 Speak when the voice display window
appears on the TV screen.
• Use the Magic Remote no further than 10
cm from your face.
• The voice recognition may fail when you
speak too fast or too slowly.
• The recognition rate may vary depending
on the user’s characteristics (voice,
pronunciation, intonation, and speed)
and the environment (noise and TV
volume).
(Q. Settings) Accesses the Quick Settings.
* Pressing and holding the button dis-
plays the Advanced menu.
Coloured buttons These access special
functions in some menus.
( : Red, : Green, : Yellow, : Blue)
Teletext buttons ( , )
These
buttons are used for teletext.
Recalls your preferred subtitle in digital
mode.
Registering magic remote
How to register the magic
remote
To use the Magic Remote, rst pair it with your TV.
1 Put batteries into the Magic Remote and turn
the TV on.
2 Point the Magic Remote at your TV and press
the Wheel (OK) on the remote control.
* If the TV fails to register the Magic Remote,
try again after turning the TV off and back on.
To Next Page
Loading...
Need help?
General
