ASSEMBLNGANDPREPARNG 15
The Kensington security system connector is located at
the rear of the TV.
For more information of installation and using, refer
to the manual provided with the Kensington security
system or visit http://www.kensington.com.
Connect the Kensington security system cable between
the TV and a table.
(Depending on model)
o-" ........ --4
to o_
_. ......... °-"
jr
s I
1 Insert and tighten the eye-bolts, or TV brackets and
bolts on the back of the TV.
- If there are bolts inserted at the eye-bolts position,
remove the bolts first.
2 Mount the wall brackets with the bolts to the wall.
Match the location of the wall bracket and the eye-/
bolts on the rear of the TV.
Connect the eye-bolts and wall brackets tightly with
a sturdy rope or cable.
Make sure to keep the rope parallel to the flat
surface.
NOTE
• Use a platformor cabinetthatisstrongand large
enough tosupportthe TV securely.
• Brackets,boltsand ropes,are optional.You can
I blai_ I d_ilionai II le s_Ir!l s !r Imy o ul !llli deal I
To Next Page
Loading...
Need help?
General
Weight and Dimensions
