LG 60PN5000 User Manual

ENGLISH
16
ASSEMBLING AND PREPARING
CAUTION
y
Disconnect the power before moving or installing
the TV. Otherwise electric shock may occur.
y
If you install the TV on a ceiling or slanted wall,
it may fall and result in severe injury. Use an
authorized LG wall mount and contact the local
dealer or qualified personnel.
y
Do not over tighten the screws as this may cause
damage to the TV and void your warranty.
y
Use only screws and wall mounts that meet
the VESA standard. Any damages or injuries by
misuse or using an improper accessory are not
covered by the warranty.
NOTE
y
Use only screws that are listed on the VESA
standard screw specifications.
y
The wall mount kit includes an installation manual
and necessary parts.
y
The wall mount bracket is optional. You can obtain
additional accessories from your local dealer.
y
The length of screws may differ depending on the
wall mount. Make sure to use the proper length.
y
For more information, refer to the manual supplied
with the wall mount.
Tidying cables
1
Install the power cord holder and power cord. It will
help prevent the power cable from being removed
by accident.
2
Gather and bind the cables with the cable holder.
(For 42PN4500)
Power Cord Holder
(Depending on model)
Cable Holder
(For 50PN4500, 60PN5000, 50/60PN5300, 50/60PN6500,
60PN6550)
Cable Holder
Power Cord Holder
(Depending on model)
CAUTION
y
Do not move the TV by holding the cable holder
and power cord holder, as the cable holders may
break, and injuries and damage to the TV may
occur.
NOTE
y
If you install the TV on a Wall, detach the cable
holder from stand body and attach it to the
protection cover or to the back cover to help keep
the cables organize.

LG 60PN5000 Specifications

General

Brand	LG
Model	60PN5000
Category	Plasma TV
Language	English