LG BP550 User Manual

3 System Setting
System Setting 21
System Setting
3
Initial Setup
When you turn on the unit for the rst time, the
initial setup wizard appears on the screen. Set the
display language and network settings on the initial
setup wizard.
1. Press
1
(POWER).
The initial setup wizard appears on the screen.
2. Use
W/S/A/D
to select a display language
and press ENTER (
b
).
3. After checking the Terms of Service, select
[Agree] to use the Premium Service and SW
Updates.
Read and prepare the preparations for the
network settings and then press ENTER (
b
)
while [Start] is highlighted.
If wired network is connected, the network
connection setting will automatically be
finished.
4. All available networks are displayed on the
screen. Use
W/S
to select [Wired Network]
or desired SSID of wireless network and press
ENTER (
b
).
If you have security on your access point, you
need to input the security code as necessary.
5. Use
W/S/A/D
to select the IP mode
between [Dynamic] and [Static].
Normally, select [Dynamic] to allocate an IP
address automatically.
6. Select [Next] and press ENTER (
b
) to apply
network settings.
Network connection status is displayed on the
screen.
For details on network settings, refer to
“Connecting to your Home Network” on page
16.
7. Check all the settings that you have set in the
previous steps.
Press ENTER (
b
) while [Finish] is highlighted
to finish the initial setup settings. If there is any
settings to be changed, use
W/S/A/D
to
select
1
and press ENTER (
b
).
8. Displays private sound mode guide. Press ENTER
(
b
).
9. Displays the guide to enjoy online contents
using LG AV Remote. Press ENTER (
b
).

LG BP550 Specifications

General

3D	Yes
Depth	195.58 mm
Width	269.24 mm
Height	43.18 mm
Weight	860 g
Device type	Blu-Ray player
Product color	Black
Audio decoders	-
Package weight	1310 g
Disc types supported	BD, BD-R, BD-RE, BD-ROM, CD, CD-R, CD-RW, DVD+R, DVD+RW, DVD-R, DVD-ROM, DVD-RW
Playback disc formats	Blu-Ray audio, Blu-Ray video, CD audio
Supported video modes	1080p
Card reader integrated	No
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Audio formats supported	AAC, FLAC, LPCM, MP1, MP2, MP3, WMA
Video formats supported	3GP, AVC, AVCHD, DAT, FLV, H.264, M4V, MKV, MOV, MP4, MPEG1, MPEG2, MPEG4, TS, VOB, WMV
Digital audio optical out	0
Analog signal format system	NTSC, PAL
Power consumption (standby)	0.5 W
Power consumption (typical)	12 W
Consumer Electronics Control (CEC)	SimpLink
Network streaming services supported	HuluPlus, Netflix, Pandora, Rhapsody, Vudu, YouTube
Audio output channels	- channels
Depth (imperial)	7.7 \
Width (imperial)	10.6 \
Height (imperial)	1.7 \