Operating 41
Operating
4
Radio Operations
Be sure that FM antenna is connected. (Page 20)
Listening to the radio
1. Press F until FM appears in the display window.
The last received station is tuned in.
2. Auto tuning:
Press and hold TUNING-/+ on the remote
control or
C
/
V
on the unit until the frequency
indication starts to change, then release. Scanning
stops when the unit tunes in a station.
Or
Manual tuning:
Press TUNING-/+ on the remote control or
C
/
V
on the unit repeatedly.
3. Adjust the volume by pressing VOL +/- on the
remote control or rotating VOLUME knob on the
unit repeatedly.
Improving poor FM reception
Press
X
on the remote control or
N
on the unit.
This will change the tuner from stereo to mono and
usually improve the reception.
Presetting the Radio Stations
You can preset 50 stations for FM.
Before tuning, make sure to turn down the volume.
1. Press F until FM appears in the display window.
2. Select the desired frequency by pressing
TUNING-/+ on the remote control or
C
/
V
on
the unit.
3. Press
m
on the remote control. A preset number
will blink in the display window.
4. Press PRESET/FOLDER +/- on the remote
control to select the preset number you want.
5. Press
m
on the remote control. The station is
stored.
6. Repeat steps 2 to 5 to store other stations.
7. To listen a preset station,
press PRESET/FOLDER +/- or 0 to 9 numerical
buttons on the remote control.
Deleting all the saved stations
1. Press CLEAR/DELETE on the remote control.
“DEL ALL” will flash up on the display window
2. Press CLEAR/DELETE on the remote control to
erase all the saved radio stations.
“DELETED ALL” will flash up on the unit display.