Operating30
Operating
3
Setting the Clock
1. Turn the unit on.
2. Press and hold CLOCK on the remote control.
3. Select time mode by pressing C/V on the
remote control.
- AM 12:00 (for an AM and PM display) or 0:00
(for a 24 hour display)
4. Press RDS/SET on the remote control to confirm
your selection.
5. Select the hours by pressing C/V on the
remote control.
6. Press RDS/SET on the remote control.
7. Select the minutes by pressing C/V on
the remote control.
8. Press RDS/SET on the remote control.
Setting the Clock through
“Music Flow Bluetooth” App
Install “Music Flow Bluetooth” app on your Android
device. (Refer to page 24)
Your unit’s clock will be automatically synchronized
with your device by activating Bluetooth connection
through “Music Flow Bluetooth” app.
Using your player as an alarm
clock
1. Turn the unit on.
2. Press and hold ALARM on the remote control.
3. Press C/V on the remote control to
change the hours and minutes and press
RDS/SET on the remote control to save.
4. Press C/V on the remote control to
select function and press RDS/SET on the
remote control to save.
- Press C/V to select a memory No. when
you select Tuner and then, press RDS/SET on
the remote control. If there is no memory No.,
this step is skipped.
5. Press C/V on the remote control to
change the volume and press RDS/SET on the
remote control to save. The clock icon “(“
shows that the alarm is set.
y If you set the clock time, you can check the
time by pressing CLOCK on the remote
control even when the player is turned off.
y You can set alarm after you set the clock
time.
y If you set the clock time and alarm, you can
check the alarm icon “(“ and alarm setting
information by pressing ALARM on the
remote control even when the unit is turned
off.
y You can select ALARM on/off mode by
pressing ALARM on the remote control.
,
Note
To Next Page
Loading...
Need help?
Power
Weight and Dimensions
