LG CM4560 User Manual

Operating 31
Operating
3
Sleep Timer Setting
Press SLEEP on the remote control repeatedly to
select delay time between 10 and 180 minutes.
After the delay time, the unit will be turned off.
To cancel the sleep function, press SLEEP on the
remote control repeatedly until “SLEEP 10” appears,
and then press SLEEP on the remote control once
again while “SLEEP 10” is displayed.
y You can check the remaining time before the
unit is turned off.
y Press SLEEP on the remote control. The
remaining time appears in the display
window.
,
Note
Dimmer
Press SLEEP on the remote control once. The display
window will be darkened by half. To cancel it, press
SLEEP on the remote control repeatedly until dim off.
All the LED turns off when Dimmer is being
operated.
,
Note
Auto power down
This unit will turn itself off to save electricity in the
case were the main unit is not connected to an
external device and is not used for 20 minutes.
The unit will also turn itself off after six hours if the
Main unit has been connected to another device
using the analog inputs.
Auto power down function is applied to only
MASTER unit in case of WIRELESS PARTY LINK
connection. In case of SLAVE unit, Auto power down
is available after disconnection SLAVE unit and
MASTER unit.
How to disconnect the wireless
network connection or the wireless
device
Turn off the unit by pressing the power button for
more than 5 seconds.

LG CM4560 Specifications

Power

power consumption (networked standby)	0.5 W
bus power supply (USB)	5 V 500 mA
amplifier (total RMS output power)	700 W

Weight and Dimensions

dimensions	206 mm x 308 mm x 284 mm
net weight	3 kg