LG CM8440 Series User Manual

3-5
kpnZWXG} mk
{w ZWYSG
{w ZWZSG
{wZW[
xZWX xZW[xZWZ
yZY^O{w ZW[P
xZWXGl
G
ZW} T
j G GSG G  GGG
GU
GGGGU
< MAIN board top view >
ONE POINT REPAIR GUIDE
3. VFD IS NOT DISPLAYED WHEN POWER ON THE SET
When power on the set, any icons or characters on VFD are not displayed.
3-1. VFD (DIG300)
3-1-1. Solution
Please check and replace DIG300 on FRONT board.
3-1-2. How to troubleshoot (Countermeasure)
1) Check if 39V, FL+ and FL-are output from SMPS to VFD via the main board.
2) Check if the IC101 outputs VFD_RST, VFD_CLK, VFD_STB, and VFD_STB to the front board.
3) Check if the VFD grid current amplifier circuit (Q301, Q303) on the front board.
Check the drive signal to the transistor’s base.
 If the control signals from VFD (DGND_2, VH, VDD) isn’t output, replace VFD with a new one.
 If the transistor doesn’t work, replace it.
3-1-3. Service hint (Any picture / Remark)

LG CM8440 Series Specifications

General

Brand	LG
Model	CM8440 Series
Category	Stereo System
Language	English