Operating32
Operating
3
Other Operations
Turn off the sound temporarily
Press MUTE
@
to mute your remote control.
You can mute your unit, for example, to answer
the telephone, the mute icon “
Q
” is blinked in the
display window.
Displaying file information
(ID3 TAG)
While playing an MP3 le containing le
information, you can display the information by
pressing INFO.
DEMO
In the power o state, it demonstrates the function
on display window with a demo sound and a
display by pressing SPK LIGHTING/DEMO.
To cancel the DEMO, press it again.
y
While DEMO, this unit will keep DEMO
status even if you unplug the power cord
connection.
y
You can enjoy other functions during
the DEMO. Then the DEMO will pause to
temporary.
-
Without input key in 10 sec, the DEMO will
play back automatically.
,
Note
Using Microphone
It is available on the function as follows : CD, USB,
AUX-MIC and BLUETOOTH.
1. Connect your microphone to the MIC jack.
2. Play the music you want.
3. Sing along with the accompaniment. Adjust
the microphone volume by rotating MIC VOL.
clockwise or unclockwise on the unit.
y
When not using the microphone, set the
MIC VOL. to minimum or turn o the MIC
and remove the microphone from the MIC
jack.
y
If the microphone is set too near the
speaker, a howling sound may be produced.
In this case, move the microphone away
from the speaker or decrease the sound
level by using the MIC VOL..
y
If sound through the microphone is
extremely loud, it may be distorted. In this
case, rotate MIC VOL. to minimum.
y
AUX-MIC function enables only your voice
to output.
,
Note
Switching on and off the
speaker lighting
SPEAKER LIGHTING : The function is to light
automatically to the music sound when music is
being played.
You can select on/o mode of the speaker light by
pressing SPK LIGHTING/DEMO on the unit.
To turn o the light, press SPK LIGHTING/DEMO
repeatedly until the light will be turned o.
CM9740-DB_DGBRLLK_ENG.indd 32 2014-02-14 �� 10:21:26
To Next Page
Loading...
Need help?
General
Weight and Dimensions
