8
ENG
ENGLISH
ASSEMBLING AND PREPARING
Using the Kensington security lock
The Kensington lock connector is located at the
rear of the monitor.
For more information on installation and usage,
refer to the Kensington lock user manual or visit
the website: http://www.kensington.com.
Connect the monitor to the table with the Kensing-
ton lock cable.
The Kensington security lock is optional. You
can obtain additional accessories from most
electronics stores.
NOTE
To avoid injury to the fingers when adjusting
the screen, do not hold the lower part of the
monitor's frame as illustrated below.
Be careful not to touch or press the screen
area when adjusting the angle of the monitor.
WARNING
The angle of the screen can be adjusted
forwards or backwards from -5° to 20° for a
comfortable viewing experience.
NOTE
Front Side Rear Side
Do not to lift up the monitor as shown below.
The monitor screen may fall off the stand base
and injure someone.
To Next Page
Loading...
Need help?
General
