SPECIFICATIONS
Description Steam Dryer
Electrical Requirements Please refer to the rating label regarding detailed information.
Gas Requirements
Dimensions
Net Weight
Drying Capacity
- Normal Cycle
- Steam Cycle
Before calling for service (cont.)
SPECIFICATIONS
Steam does not
generate but no error
code is shown
Garments still
wrinkled after
STEAM FRESH™
in dryer.
There are no creases
left on garment after
STEAM FRESH™
wrinkles from fabric.
Garments have
static after REDUCE
STATIC
Garments are too
damp or too dry after
REDUCE STATIC
Garments are not uniformly
damp after EASY IRON
Number of garments or load size not properly
selected at the beginning of the cycle.
Water drips from door
during Steam Cycle
operation. Some condensation may drip out the bottom of the door.
Steam is not visible
during Steam Cycle
will normally form on the inside of the dryer door if the steam system is
operating normally.
Drum does not turn
during Steam Cycle
Cannot see steam
vapor at the
beginning of cycle
The display shows
as a comforter.
Press the LESS TIME button to reduce the indicated load size.
Odors remain in
clothing after
STEAM FRESH™
completely.
is on during the
drying cycle
FLOW SENSE
TM
indicator shows four
bars during the drying
cycle
restrictions.
lint buildup or debris.
the external dryer venting.
Dryer can be used in this condition, but drying times may be longer.
TM
system, the indicator
will remain on for two hours after the end of the cycle. Opening the door or
pressing the POWER button will turn off the display.