20
Playing a DVD VR format Disc
This unit will play DVD-R/RW disc that is recorded
using the DVD-Video format that have been finalized
using a DVD-recorder.
This unit will play DVD-RW disc that is recorded
using the Video Recording (VR) format.
1. Insert a disc and close the tray, It start playing
automatically.
2. The DVD-VR menu appears on the TV screen
when you press DVD MENU buttons while playing.
3. Press v / V to select a track then press
PLAY (
NN
) or ENTER and playback starts.
4. Press DVD MENU to move to the list menu.
Notes:
• Unfinalized DVD-R/RW discs cannot be played in
this player.
• Some DVD-VR disc are made with CPRM data by
DVD RECORDER. Player does not support these
kinds of discs.
What is CPRM?
CPRM is a copy protection system (with scramble
system) only allowing the recording of ‘copy once’
broadcast programs. CPRM stands for Content
Protection for Recordable Media.
Playing an USB
1. Connect the USB device to the USB port on the
front panel after power is on.
2. Press RETURN (O) on the remote control.
The USB choice menu appears on the TV screen.
3. Press ENTER.
The menu appears.
4. Press RETURN (O) to exit the menu.
To Remove the USB from the unit
1. Press RETURN (O) to exit the menu.
2. Remove the USB from the unit.
For details on each operation item,
refer a relevant page. (See the page 17-19)
Notes:
• Do not extract the USB device in operating.
• Music files (MP3/WMA), image files (JPEG) and
Divx files can be played.
• This unit can not use USB HUB.
• This unit is not supported when the total number of
files is more than 1,000.
• The USB function of this unit does not support all
kinds of USB devices.
• This unit supports only USB Flash Memory.
• This unit can support USB1.1.
To Next Page
Loading...
Need help?
General
