To Next Page

To Previous Page



Only for training and service purposes



1) Turn off the power switch at the front side of the display.

2) Wait for about 5 seconds and press MODE, POWER switch with 1 second interval, press MENU.

3) The SVC OSD menu contains additional menus that the User OSD menu as described below.

a) CLEAA ETI: NO

b) Auto Color: NO

c) AGING: OFF

d) PANEL: AUO240/1080

e) NVRAM INIT: NO

f) R/G/B-9300K: Allows you to set the R/G/B-9300K value manually.

g) R/G/B-6500K: Allows you to set the R/G/B-6500K value manually.

h) R/G/B-Offset: Allows you to set the R/G/B-Offset value manually. (Analog Only)

i) R/G/B-Gain: Allows you to set the R/G/B-Gain value manually. (Analog Only)

e) R/G/B-sRGB: Allows you to set the R/G/B- sRGB value manually.

Figure 1 Cable Connection for Micom uploading

SERVICE MODE

Connect to

the PC

Connect to

the monitor



Questions and Answers:

Need help?

Do you have a question about the LG E1941S and is the answer not in the manual?

LG E1941S Specifications

General

3D	No
Pixel pitch	0.30 x 0.30 mm
Aspect ratio	16:9
Display diagonal	18.5 \
Display resolution	1366 x 768 pixels
Viewing angle, vertical	160 °
Contrast ratio (dynamic)	-
Contrast ratio (typical)	1000:1
Display number of colors	16.78 million colors
Viewing angle, horizontal	170 °
Display brightness (typical)	250 cd/m²
Supported graphics resolutions	1366 x 768
HDCP	Yes
DVI-D ports quantity	0
Product color	Black
LED indicators	Power
Tilt angle range	-5 - 15 °
Panel mounting interface	- mm
Power consumption (standby)	0.3 W
Power consumption (typical)	18 W
Cables included	VGA

Weight and Dimensions