7
ENG
ENGLISH
ASSEMBLING AND PREPARING
3
Press Power button on the front switch of panel
to turn the power on.
Mounting on a table
1
Lift and tilt the Monitor set into its upright
position on a table.
Leave a 10 cm (minimum) space from the wall
for proper ventilation.
10 cm
10 cm
10 cm
10 cm
Disconnect the power cord first, and then move
or install the Monitor set. Otherwise electric
shock may occur.
CAUTION
2
Connect the AC-DC Adapter and Power Cord
to a wall outlet.
Detaching the Stand Body
(Using
the Wall mount)
1
Remove 2 screws and detach the Stand Body.
To Next Page
Loading...
Need help?
General
