To Next Page

To Previous Page

Display image is incorrect

Troubleshooting

● The screen color is

mono or abnormal.

● The screen blinks.

•

Check if the signal cable is properly connected

and use a screwdriver to fasten if necessary.

•

Make sure the video card is properly inserted in

the slot.

•

Set the color setting higher than 24 bits (true color)

at Control Panel - Settings.

•

Check if the screen is set to interlace mode and if

yes, change it to the recommend resolution.

Do you see an "Unrecognized monitor, Plug&Play (VESA

DDC) monitor found" message?

●

Have you installed the

display driver?

•

Be sure to install the display driver from the display

driver CD (or diskette) that comes with your

display. Or, you can also download the driver from

our web site: http://www.lg.com.

•

Make sure to check if the video card supports

Plug&Play function.

The Audio function is not working

●

Picture OK & No sound.

• Check whether volume is "0".

• Check sound muted.

• HDMI cable installed properly.

• Head phone cable installed properly.

• Check sound format. Not supply to compressed

sound format.

Questions and Answers:

Need help?

Do you have a question about the LG E2241V and is the answer not in the manual?

LG E2241V Specifications

General

3D	No
Aspect ratio	16:9
Display diagonal	21.5 \
Viewing angle, vertical	160 °
Contrast ratio (dynamic)	5000000:1
Display number of colors	16.78 million colors
Viewing angle, horizontal	170 °
Display brightness (typical)	250 cd/m²
Supported graphics resolutions	1920 x 1080 (HD 1080)
HDCP	-
DVI-I ports quantity	0
Certification	TUV-GS, FCC-B, CE
Product color	Black
LED indicators	Power
Tilt angle range	-5 - 15 °
Panel mounting interface	75 x 75 mm

Weight and Dimensions