To Next Page

To Previous Page

Connecting the Display

Before setting up the monitor, ensure that the power to the monitor, the computer

system, and other attached devices is turned off.

Connecting the stand

1. Place the monitor with its front facing downward on

a soft cloth.

2. Assemble the Stand Body into the

product in the correct direction as shown in

the picture. Make sure you push it until you

hear it “click”.

3. Assemble the Stand Base(Front,

Rear) into the Stand Body in the

correct direction.

4. Use a coin on the back of the stand base and turn the screw clockwise to tighten.

5. Once assembled take the monitor up carefully and face the front side.

Important

This illustration depicts the general model of connection. Your monitor may differ from

the items shown in the picture.

Do not carry the product upside down holding only the stand base. The product may

fall and get damaged or injure your foot.

Stand Body

Hinge Body

Stand Body

Stand Base

Questions and Answers:

Need help?

Do you have a question about the LG E2241V and is the answer not in the manual?

LG E2241V Specifications

General

3D	No
Aspect ratio	16:9
Display diagonal	21.5 \
Viewing angle, vertical	160 °
Contrast ratio (dynamic)	5000000:1
Display number of colors	16.78 million colors
Viewing angle, horizontal	170 °
Display brightness (typical)	250 cd/m²
Supported graphics resolutions	1920 x 1080 (HD 1080)
HDCP	-
DVI-I ports quantity	0
Certification	TUV-GS, FCC-B, CE
Product color	Black
LED indicators	Power
Tilt angle range	-5 - 15 °
Panel mounting interface	75 x 75 mm

Weight and Dimensions