13
ENG
ENGLISH
CUSTOMIZING SETTINGS
Customizing Settings
Menu Settings
1
Press MENU button on the bottom of the Monitor set
to display the MENU OSD.
2
Set the options by pressing the or or
buttons.
3
Select the "NEXT MENU" button to enter the more
option settings.
4
Select EXIT to leave the OSD menu.
To return to the upper menu or set other menu items,
use the up arrow (
) button.
Each option is explained below.
MENU > NEXT MENU Analog Digital HDMI Description
PICTURE
SHARPNESS
To adjust the clearness of the screen .
BLACK LEVEL To set offset level
OVER SCAN To improve the clarity and stability of the screen
COLOR GAMMA
To customize the color of the screen
COLOR TEMP
DISPLAY HORIZONTAL
To adjust the position of the screen
VERTICAL
CLOCK
To improve the clarity and stability of the screen
PHASE
VOLUME
To adjust the volume
OTHERS LANGUAGE
To customize the screen status for a user's operating
environment
POWER INDICATOR
WHITE BALANCE
y
Analog: D-SUB(Analog signal) input.
y
Digital: DVI-D(Digital signal) input.
y
HDMI: HDMI(Digital signal) input.
MENU Analog Digital HDMI Description
BRIGHTNESS
To adjust the brightness, contrast of the screen
CONTRAST
WIDE/ORIGINAL
WIDE
Switch to full screen mode according to input image signal.
ORIGINAL
Change the input image signal ratio to original.
* This function works only if input resolution is lower than Monitor set ratio
(16:9).
RESET
Restore all factory default settings. Press the
,
buttons to reset
immediately.
To Next Page
Loading...
Need help?
General
