LG E2350V User Manual

10
Connecting the Display
A
B
Connect DVI-D(Digital signal) Cable
Connect D-sub(Analog signal) Cable
Connect HDMI Cable
1. Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.
2. Connect signal input cable and power cord in order, then tighten the screw
of the signal cable.
Connecting with the PC
1
2
Wall-outlet type
OR
Wall-outlet type
Mac adapter : For Apple Macintosh use, a
separate plug adapter is needed to change the
15 pin high density (3 row) D-sub VGA
connector on the supplied cable to a 15 pin 2
row connector.
When using a D-Sub signal input cable connector
for Macintosh
NOTE
This is a simplified representation of the rear view.
This rear view represents a general model; your display may differ from the view as shown.
Varies according to model.
C
Headphone/Earphone Input
AV equipment
(Set-Top Box, DVD, Video,
Video Game Console)
* HDMI is optimized on the AV equipment.
* Not supported PC
DVI-D (This feature is not available in all countries.)

LG E2350V Specifications

General

Pixel pitch	0.265 x 0.265 mm
Aspect ratio	16:9
Display diagonal	23 \
Vertical scan range	56 - 75 Hz
Horizontal scan range	30 - 83 kHz
Contrast ratio (dynamic)	5000000:1
Contrast ratio (typical)	1000:1
Viewing angle, horizontal	170 °
Display brightness (typical)	250 cd/m²
HDCP	Yes
DVI-I ports quantity	0
Product color	Black
Market positioning	-
Power requirements	90 - 264 Vac, 47 - 63 Hz
Power consumption (standby)	1 W
Power consumption (typical)	28 W
LED indicators	Stand-by

Weight and Dimensions

Bezel width (side)	3300 mm
Depth (with stand)	198 mm
Width (with stand)	559.8 mm
Height (with stand)	428.1 mm
Depth (without stand)	39.9 mm
Width (without stand)	529.8 mm
Height (without stand)	354 mm
Weight (without stand)	2860 g