LG E2350V User Manual

13
Control Panel Functions
AUTO Button
AUTO IMAGE ADJUSTMENT
When adjusting your display settings, always press
the AUTO button before entering the On Screen
Display(OSD). (Only Analog Mode)
This will automatically adjust your display image to
the ideal settings for the current screen resolution
size (display mode).
The best display mode is
E2250V / E2350V : 1920 x 1080
INPUT Button
Use this button to turn the display on or off.
From front view,the power indicator stays purple if the
display is running properly (On Mode). If the display
is in Sleep Mode (Energy Saving), the power indicator
is blinking purple.
Power Button &
Power Indicator
When two input signals at least are connected, you can
select the input signal (D-SUB/DVI/HDMI) you want.
When only one signal is connected, it is automatically
detected. The default setting is D-Sub.
(SOURCE Hot key)
Exit the OSD(On Screen Display).
EXIT Button
This is lens for light sensor detect outside luminance,
when setting AUTO BRIGHT ON.
Light Sensor
Use this button to select source from input.

LG E2350V Specifications

General

Pixel pitch	0.265 x 0.265 mm
Aspect ratio	16:9
Display diagonal	23 \
Vertical scan range	56 - 75 Hz
Horizontal scan range	30 - 83 kHz
Contrast ratio (dynamic)	5000000:1
Contrast ratio (typical)	1000:1
Viewing angle, horizontal	170 °
Display brightness (typical)	250 cd/m²
HDCP	Yes
DVI-I ports quantity	0
Product color	Black
Market positioning	-
Power requirements	90 - 264 Vac, 47 - 63 Hz
Power consumption (standby)	1 W
Power consumption (typical)	28 W
LED indicators	Stand-by

Weight and Dimensions

Bezel width (side)	3300 mm
Depth (with stand)	198 mm
Width (with stand)	559.8 mm
Height (with stand)	428.1 mm
Depth (without stand)	39.9 mm
Width (without stand)	529.8 mm
Height (without stand)	354 mm
Weight (without stand)	2860 g